############################ #### arb-common_6.0.6-4_all.deb ############################ ### Description: ARB PT-server administrators: # The default configuration of PT-server slots in /etc/arb/arb_tcp.dat # gives ARB three global slots accessible by all users (connecting to # localhost:${PORT}), as well as three slots to give private per-user # access (connecting to ~/.arb_pts/${USER}${NUMBER}.socket). # . # Only members of the "arb" system group will be able to build and update # the shared PT-servers. Please enter the login names for these privileged # users. # d-i arb/group multiselect # Possible choices: ${users} ############################ #### distributed-net_2.9112.521+arm64-1_amd64.deb ############################ ### Description: Run the distributed.net client configuration utility? # The distributed.net client needs to be configured before it can be used. # While most options have reasonable defaults, you need to specify the e-mail # address to which you would like distributed.net to credit any work done by # the client. If you are installing the distributed-net package for the first # time, then you must configure the client, otherwise the distributed.net client # will refuse to start. # . # When the distributed.net client is run as a daemon (via /etc/init.d/distributed-net), # the output will be redirected to /var/log/distributed-net.log. You do not # need to set up a log file. Since the init script is controlling the # distributed.net client, you should not enable "quiet mode" as that breaks the # init script. # d-i distributed-net/fullconfig boolean false ############################ #### fex_20160919-2~deb10u1_all.deb ############################ ### Description: Last installed version for internal use # To upgrade the htdocs dir postinst needs to know the last installed # version and verify its htdocs contents to the internal database # and make sure only unaltered files are overwritten. # d-i fex/lastver string 0 ############################ #### firmware-ipw2x00_20190114-2_all.deb ############################ ### Description: Do you agree to the "Intel Pro Wireless 2100 and 2200/2915 License"? # In order to install this package, you must agree to the following terms, # the "Intel Pro Wireless 2100 and 2200/2915 License". If you do not agree, # the installation will be canceled. # . # SOFTWARE LICENSE AGREEMENT (Final, Single User) # . # Do not use or load this firmware image (the "Software") until you have # carefully read the following terms and conditions. By loading or using # the Software, you agree to the terms of this Agreement. If you do not # wish to so agree, do not install or use the Software. # . # LICENSE. You may copy and use the Software, subject to these conditions: # . # 1. This Software is licensed for use only in conjunction with Intel # component products. Use of the Software in conjunction with non-Intel # component products is not licensed hereunder. # . # 2. You may not copy, modify, rent, sell, distribute or transfer any part # of the Software except as provided in this Agreement, and you agree to # prevent unauthorized copying of the Software. # . # 3. You may not reverse engineer, decompile, or disassemble the Software. # . # 4. You may not sublicense the Software. # . # 5. The Software may contain the software or other property of third party # suppliers. # . # OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software # remains with Intel or its suppliers. The Software is copyrighted and # protected by the laws of the United States and other countries, and # international treaty provisions. You may not remove any copyright notices # from the Software. Intel may make changes to the Software, or items # referenced therein, at any time without notice, but is not obligated to # support or update the Software. Except as otherwise expressly provided, # Intel grants no express or implied right under Intel patents, copyrights, # trademarks, or other intellectual property rights. You may transfer the # Software only if a copy of this license accompanies the Software and the # recipient agrees to be fully bound by these terms. # . # EXCLUSION OF OTHER WARRANTIES EXCEPT AS PROVIDED ABOVE, THE SOFTWARE IS # PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED WARRANTY OF ANY KIND # INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, OR FITNESS FOR A # PARTICULAR PURPOSE. Intel does not warrant or assume responsibility for # the accuracy or completeness of any information, text, graphics, links or # other items contained within the Software. # . # LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS SUPPLIERS BE # LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, LOST # PROFITS, BUSINESS INTERRUPTION, OR LOST INFORMATION) ARISING OUT OF THE # USE OF OR INABILITY TO USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF # THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT EXCLUSION OR # LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES OR CONSEQUENTIAL OR # INCIDENTAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. YOU MAY # ALSO HAVE OTHER LEGAL RIGHTS THAT VARY BETWEEN JURISDICTIONS. # . # TERMINATION OF THIS AGREEMENT. Intel may terminate this Agreement at any # time if you violate its terms. Upon termination, you will immediately # destroy the Software. # . # APPLICABLE LAWS. Claims arising under this Agreement shall be governed by # the laws of California, excluding its principles of conflict of laws and # the United Nations Convention on Contracts for the Sale of Goods. You may # not export the Software in violation of applicable export laws and # regulations. Intel is not obligated under any other agreements unless # they are in writing and signed by an authorized representative of Intel. # . # GOVERNMENT RESTRICTED RIGHTS. The Software is provided with "RESTRICTED # RIGHTS." Use, duplication, or disclosure by the Government is subject to # restrictions as set forth in FAR52.227-14 and DFAR252.227-7013 et seq. or # their successors. Use of the Software by the Government constitutes # acknowledgment of Intel's proprietary rights therein. Contractor or # Manufacturer is Intel Corporation, 2200 Mission College Blvd., Santa # Clara, CA 95052. # d-i firmware-ipw2x00/license/accepted boolean false ############################ #### firmware-ivtv_20190114-2_all.deb ############################ ### Description: Do you agree to the "Hauppauge End-User Firmware License Agreement"? # In order to install this package, you must agree to the following terms, # the "Hauppauge End-User Firmware License Agreement". If you do not agree, # the installation will be canceled. # . # END-USER FIRMWARE LICENSE AGREEMENT # . # IMPORTANT - PLEASE READ BEFORE COPYING, INSTALLING OR USING. # . # Do not use or load this firmware image (the "Firmware") until you have # carefully read the following terms and conditions. By loading or using # the Firmware, you agree to the terms of this Agreement. If you do not # wish to so agree, do not install or use the Firmware. # . # LICENSEES: Please note: # . # * If you are an End-User, only the END-USER FIRMWARE LICENSE AGREEMENT # applies (this license). # . # * If you are an Original Equipment Manufacturer (OEM), Independent # Hardware Vendor (IHV), or Independent Firmware Vendor (ISV), the # OEM/IHV/ISVFIRMWARE LICENSE AGREEMENT applies, as well as the END-USER # FIRMWARE LICENSE AGREEMENT (this license). # . # LICENSE. You may copy and use the Firmware, subject to these conditions: # . # 1. This Firmware is licensed for use only in conjunction with Hauppauge # component products. Use of the Firmware in conjunction with # non-Hauppauge component products is not licensed hereunder. # . # 2. You may not copy, modify, rent, sell, distribute or transfer any # part of the Firmware except as provided in this Agreement, and you # agree to prevent unauthorized copying of the Firmware. # . # 3. You may not reverse engineer, decompile, or disassemble the Firmware. # . # 4. You may not sublicense the Firmware. # . # 5. The Firmware may contain the firmware or other property of third party # suppliers. # . # TRADEMARKS. Except as expressly provided herein, you shall not use # Hauppauge's name in any publications, advertisements, or other # announcements without Hauppauge's prior written consent. You do not have # any rights to use any Hauppauge trademarks or logos. # . # OWNERSHIP OF FIRMWARE AND COPYRIGHTS. Title to all copies of the Firmware # remains with Hauppauge or its suppliers. The Firmware is copyrighted and # protected by the laws of the United States and other countries, and # international treaty provisions. You may not remove any copyright notices # from the Firmware. Hauppauge may make changes to the Firmware, or items # referenced therein, at any time without notice, but is not obligated to # support or update the Firmware. Except as otherwise expressly provided, # Hauppauge grants no express or implied right under Hauppauge patents, # copyrights, trademarks, or other intellectual property rights. You may # transfer the Firmware only if a copy of this license accompanies the # Firmware and the recipient agrees to be fully bound by these terms. # . # EXCLUSION OF WARRANTIES. THE FIRMWARE IS PROVIDED "AS IS" AND POSSIBLY # WITH FAULTS. UNLESS EXPRESSLY AGREED OTHERWISE, HAUPPAUGE AND ITS # SUPPLIERS AND LICENSORS DISCLAIM ANY AND ALL WARRANTIES AND GUARANTEES, # EXPRESS, IMPLIED OR OTHERWISE, INCLUDING BUT NOT LIMITED TO THE WARRANTIES # OF MERCHANTABILITY, NONINFRINGEMENT, OR FITNESS FOR A PARTICULAR PURPOSE. # Hauppauge does not warrant or assume responsibility for the accuracy or # completeness of any information, text, graphics, links or other items # contained within the Firmware. You assume all liability, financial or # otherwise, associated with Your use or disposition of the Firmware. # . # LIMITATION OF LIABILITY. IN NO EVENT SHALL HAUPPAUGE OR ITS SUPPLIERS AND # LICENSORS BE LIABLE FOR ANY DAMAGES WHATSOEVER FROM ANY CAUSE OF ACTION OF # ANY KIND (INCLUDING, WITHOUT LIMITATION, LOST PROFITS, BUSINESS # INTERRUPTION, OR LOST INFORMATION) ARISING OUT OF THE USE, MODIFICATION, # OR INABILITY TO USE THE FIRMWARE, OR OTHERWISE, NOR FOR PUNITIVE, # INCIDENTAL, CONSEQUENTIAL, OR SPECIAL DAMAGES OF ANY KIND, EVEN IF # HAUPPAUGE OR ITS SUPPLIERS AND LICENSORS HAVE BEEN ADVISED OF THE # POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT EXCLUSION OR # LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES OR CONSEQUENTIAL OR # INCIDENTAL DAMAGES, SO CERTAIN LIMITATIONS MAY NOT APPLY. YOU MAY ALSO # HAVE OTHER LEGAL RIGHTS THAT VARY BETWEEN JURISDICTIONS. # . # WAIVER AND AMENDMENT. No modification, amendment or waiver of any # provision of this Agreement shall be effective unless in writing and # signed by an officer of Hauppauge. No failure or delay in exercising any # right, power, or remedy under this Agreement shall operate as a waiver of # any such right, power or remedy. Without limiting the foregoing, terms # and conditions on any purchase orders or similar materials submitted by # you to Hauppauge, and any terms contained in Hauppauges standard # acknowledgment form that are in conflict with these terms, shall be of no # force or effect. # . # SEVERABILITY. If any provision of this Agreement is held by a court of # competent jurisdiction to be contrary to law, such provision shall be # changed and interpreted so as to best accomplish the objectives of the # original provision to the fullest extent allowed by law and the remaining # provisions of this Agreement shall remain in full force and effect. # . # EXPORT RESTRICTIONS. Each party acknowledges that the Firmware is subject # to applicable import and export regulations of the United States and of # the countries in which each party transacts business, specifically # including U.S. Export Administration Act and Export Administration # Regulations. Each party shall comply with such laws and regulations, as # well as all other laws and regulations applicable to the Firmware. # Without limiting the generality of the foregoing, each party agrees that # it will not export, re-export, transfer or divert any of the Firmware or # the direct programs thereof to any restricted place or party in accordance # with U.S. export regulations. Note that Firmware containing encryption # may be subject to additional restrictions. # . # APPLICABLE LAWS. Claims arising under this Agreement shall be governed by # the laws of New York, excluding its principles of conflict of laws and the # United Nations Convention on Contracts for the Sale of Goods. You may not # export the Firmware in violation of applicable export laws and # regulations. Hauppauge is not obligated under any other agreements unless # they are in writing and signed by an authorized representative of # Hauppauge. # . # GOVERNMENT RESTRICTED RIGHTS. The Firmware is provided with "RESTRICTED # RIGHTS." Use, duplication, or disclosure by the Government is subject to # restrictions as set forth in FAR52.227-14 and DFAR252.227-7013 et seq. or # their successors. Use of the Firmware by the Government constitutes # acknowledgment of Hauppauge's proprietary rights therein. Contractor or # Manufacturer is Hauppauge Computer Works, Inc. 91 Cabot Court Hauppauge, # NY 11788 # . # TERMINATION OF THIS AGREEMENT. Hauppauge may terminate this Agreement at # any time if you violate its terms. Upon termination, you will immediately # destroy the Firmware or return all copies of the Firmware to Hauppauge. # d-i firmware-ivtv/license/accepted boolean false ############################ #### libmkl-dev_2019.2.187-1_amd64.deb ############################ ### Description: Use libmkl_rt.so as the default alternative to BLAS/LAPACK? # Intel MKL's Single Dynamic Library (SDL) is installed on your machine. This # shared object can be used as an alternative to both libblas.so.3 and # liblapack.so.3, so that packages built against BLAS/LAPACK can directly use # MKL without rebuild. # . # However, MKL is non-free software, and in particular its source code is not # publicly available. By using MKL as the default BLAS/LAPACK implementation, # you might be violating the licensing terms of copyleft software that would # become dynamically linked against it. Please verify that the licensing terms # of the program(s) that you intend to use with MKL are compatible with the MKL # licensing terms. For the case of software under the GNU General Public # License, you may want to read this FAQ: # . # https://www.gnu.org/licenses/gpl-faq.html#GPLIncompatibleLibs # . # If you don't know what MKL is, or unwilling to set it as default, just choose # the preset value or simply type Enter. # d-i libmkl-rt/use-as-default-blas-lapack boolean false ### Description: Which of the these alternatives should point to MKL? # Please select the alternatives that should point to MKL. # The selection applies to all available architectures, and the related # development packages will follow the same selection. # . # Typically the user may want to point both BLAS/LAPACK to MKL (libmkl_rt.so). # Type Enter if you are not sure what to select. # d-i libmkl-rt/exact-so-3-selections multiselect libblas.so.3, liblapack.so.3, libblas64.so.3, liblapack64.so.3, # Possible choices: libblas.so.3, liblapack.so.3, libblas64.so.3, liblapack64.so.3, ############################ #### libmkl-rt_2019.2.187-1_amd64.deb ############################ ### Description: Use libmkl_rt.so as the default alternative to BLAS/LAPACK? # Intel MKL's Single Dynamic Library (SDL) is installed on your machine. This # shared object can be used as an alternative to both libblas.so.3 and # liblapack.so.3, so that packages built against BLAS/LAPACK can directly use # MKL without rebuild. # . # However, MKL is non-free software, and in particular its source code is not # publicly available. By using MKL as the default BLAS/LAPACK implementation, # you might be violating the licensing terms of copyleft software that would # become dynamically linked against it. Please verify that the licensing terms # of the program(s) that you intend to use with MKL are compatible with the MKL # licensing terms. For the case of software under the GNU General Public # License, you may want to read this FAQ: # . # https://www.gnu.org/licenses/gpl-faq.html#GPLIncompatibleLibs # . # If you don't know what MKL is, or unwilling to set it as default, just choose # the preset value or simply type Enter. # d-i libmkl-rt/use-as-default-blas-lapack boolean false ### Description: Which of the these alternatives should point to MKL? # Please select the alternatives that should point to MKL. # The selection applies to all available architectures, and the related # development packages will follow the same selection. # . # Typically the user may want to point both BLAS/LAPACK to MKL (libmkl_rt.so). # Type Enter if you are not sure what to select. # d-i libmkl-rt/exact-so-3-selections multiselect libblas.so.3, liblapack.so.3, libblas64.so.3, liblapack64.so.3, # Possible choices: libblas.so.3, liblapack.so.3, libblas64.so.3, liblapack64.so.3, ############################ #### kstars-data-extra-tycho2_1.1r1-9.1_all.deb ############################ ### Description: Action for the /etc/kde4/kstarsrc file: # A kstars global configuration file already exists. # . # The package installation process can't modify it, but you can # back it up now and create a new one. You will be prompted for # options in this file. # d-i kstars-data-extra/kstarsrc-exists select keep # Possible choices: keep, replace (preserving backup), overwrite ### Description: Create /etc/kde4/kstarsrc file? # There is no kstars global configuration file. # . # A configuration file will be needed if user downloads should be # disabled, but if not then it is still safe to create one. You will # be prompted for options in this file. # d-i kstars-data-extra/kstarsrc-does-not-exist boolean true ### Description: User data downloads for kstars: # KStars has a download feature allowing users to download extra data # files for their own use. Since packaged catalogs can be handled more # efficiently by installing a single central copy, you may wish to # restrict the use of this feature. # . # * enable - users will be able to download data files; # * disable - individual users can re-enable data downloads (to # download other data files) in their .kstarsrc; # * lock - users cannot enable data downloads. # d-i kstars-data-extra/disable-downloads select lock # Possible choices: enable, disable, lock ### Description: for internal use # Not shown question to hold some data in the database # d-i kstars-data-extra/kstarsrc-previously-exists select unset # Possible choices: unset, previously exists, does not exist ############################ #### nvidia-legacy-check_418.226.00-3_amd64.deb ############################ ### Description: for internal use # Can be preseeded. If set to false, disables the check for # old GPUs that require a legacy driver instead of this driver. # d-i nvidia-driver/check-for-unsupported-gpu boolean true ### Description: for internal use # Remembers the name of the legacy driver where the # install-even-if-unsupported-gpu-exists question was answered with "yes". # The question will be asked again if the legacy driver name changes. # d-i nvidia-driver/supported-in-legacy-driver-name string ### Description: Install ${vendor} driver despite unsupported graphics card? # This system has a graphics card which is no longer handled by the ${vendor} # driver (package ${driver}). You may wish to keep the package installed - # for instance to drive some other card - but the card with the following # chipset won't be usable: # . # ${unsupported-device} # . # The above card requires either the non-free legacy ${vendor} driver # (package ${legacy_driver}) or the free ${free_name} driver # (package ${free_driver}). # . # Use the update-glx command to switch between different installed drivers. # . # Before the ${free_name} driver can be used you must # remove ${vendor} configuration from xorg.conf (and xorg.conf.d/). # d-i nvidia-driver/install-even-if-unsupported-gpu-exists boolean false ############################ #### trn4_4.0-test77-12_amd64.deb ############################ ### Description: What news server should be used for reading and posting news? # trn is configured to read news via an NNTP connection, and needs to know # the fully-qualified host name of the server (such as news.example.com). If # you have a local news spool, you should consider installing some NNTP # server like inn2; in that case, enter "localhost" as your news server. # d-i shared/news/server string ### Description: What is your system's mail name? # Please enter the 'mail name' of your system. This is the hostname portion # of the address to be shown on outgoing news and mail messages, and is used # by many packages. trn4 users may override this individually by setting the # FROM environment variable. # d-i trn4/mail-name string